MY HOBBYS
Home FOR SALE SIGN & WRAPS REAL ESTATE 50s Hot Rod LOUVERS MY HOBBYS CONTACT ME HANDY LINKS VW STUFF

 

-

JUST BELOW HERE ARE SOME OF MY PAST PROJECTS I BUILT & SOLD. JUST CLICK ON THE LITTLE PICTURES

29 FORD 1.jpg (157972 bytes)29 FORD 2.jpg (147005 bytes)29 FORD SEDAN WITH "RADIR" WHEELS & WIDE WHITES

54 FORD.jpg (126830 bytes)54 FORD 2.jpg (138067 bytes)54 FORD "GLASSTOP", CHOPPED, 239ci, 3X2s & 3 ON THE TREE

AMPHICAR 1.jpg (123484 bytes)AMPHICAR 2.jpg (100939 bytes)1967 AMPHICAR, I BOUGHT THE NICE ONE AS IS AND THE OTHER CAME WITH IT

BOAT 1.jpg (140030 bytes)BOAT 2.jpg (123124 bytes)1976 "SLEEKCRAFT" JET BOAT WITH A CRATE 502/502 CHEVY

MORRIS 1.jpg (145068 bytes)MORRIS 2.jpg (156201 bytes)59 MORRIS MINOR WOODY, I INSTALLED A FORD 302 WITH KOOL AC & A 9 INCH REAR

48 Thames today.jpg (255247 bytes)THAMES 1.jpg (115567 bytes)THAMES 2.jpg (113203 bytes)DCP00898.JPG (166255 bytes)DCP00983.JPG (139383 bytes)

48 THAMES PANEL, BUILT 351 WINDSOR, C6 & FORD 9 INCH REAR, AC & CRUISE

 

 

 

THIS ONE'S FOR SALE !!

1948 Ford Truck Cab & Chassis Project

 

For Sale here is my Hot Rod project. I started it around 2006 and lost interest somewhere since then. It was set up with an early Hemi engine and GM 400th trans of which I have since sold. (No engine/trans) I am offering the project as you otherwise see it here to be finished as a Nostalgia Gasser look as I was doing or a Rat Rod. Your Choice !! I removed the bottom 6 inches of the cab and did not chop the top. New cab mounts and floors are near completed

Below I listed most of the parts and pieces included with the sale of which I have between $8k & $9k invested in. That figure does not include a few hundred hours of fabrication work I've completed thus far. It does include a 1948 Ford Pa. title, and it is a rolling chassis of which can be easily loaded on a trailer for transport

Most parts sourced from Posie's, LMC truck parts, S&W Chassis, Speedway Motors, Streamline Hot Rod, CPP Classics, ET Wheel & a few others

I've included quite a few photos below the text here. Please feel free to contact me for any more info. My selling price is less than I have in the parts alone and of course my labor is included for free at that price also. I have no need for tire kickers or low ballers. If you have serious interest, I will be glad to hear from you

Asking price - $9500

Selling price - $7500

Contact - Terry Goodman

717-514-4350

Middletown, Pa.

 

  INVENTORY OF GASSER/RAT ROD PROJECT PARTS

(PLEASE NOTE THAT NO ENGINE/TRANS IS INCLUDED)

 *1948 Ford, cab, chassis, Pa. title

* Rear axle (mounted) -  housing 9" Ford drum brakes (used)

* Spare rear axle -- Complete extra 9" rear included (used)

* Rear suspension S&W ladder bar, coil over (new)

* Front axle -- 48-52 Ford dropped 4" (new)

* Front springs Posies -- Dual Flex Lowered (new)

* Front brakes -- 11" disc w/GM calipers, SS hoses (new)

* Misc. brake items -- S&W dual master cyl & pedal set (new)

* Steering -- 95 Camaro tilt column, w/Posies joints (used/new)

* Steering box -- Stock w/drag link, nostalgia look (used)

* Wheels -- Front, ET Gasser, 15x6  Rear, ET Altered 15x10 (new)

* Tires -- Front, M/T Sportsman 28x7.50  Rear, M/T, I series N50s (new)

* Lighting -- Rear 48 Chevy, Front Amber park/turn, H-lamps & brackets (new)

* Grill, Shell & Rad -- 32 Ford, stainless grill & aluminum Radiator (new)

* Glass -- 4 pc. set, tinted, (eliminated wing windows) (all around new)

* Door glass closers -- Power units, semi installed (new)

* Shifter -- TCI  Outlaw Auto, Window switches mounted in console (new)

* Seats -- Kirkey Race aluminum w/padded covers & Harness belts (new)

* Dash -- Purple vinyl, Tack, Speedo, Full gauges & CD stereo (new)

* Roll Bar -- Removable custom built Steel w/16 gauge steel floors (new)

* Fuel Cell -- Urethane, SS straps, w/ gas gauge sending unit, Gals.-? (new)

* Bed -- Custom Built, Steel floors for wood insert, louvered w/fenders (new)

* LMC Truck parts -- All rubber, window tracks & seals included (new)

 

I may have missed some items above and I also have many misc. parts that

were needed and are include, along with most of the receipts for these items

 

CLICK ON THE THUMBNAILS BELOW

 

 

 

JUST BELOW HERE ARE MY CURRENT RIDES. CLICK ON THESE PICTURES ALSO

 

 

A GOOD FRIEND OF MINE BUILT THIS 46 SEDAN DELIVERY ABOUT 10 YEARS AGO. HE RECENTLY GOT THE IDEA TO SELL HIS HOME IN THE COUNTRY WITH MASSIVE SHOP & STORAGE AREAS AND MOVE TO A TOWNHOUSE IN THE LOCAL BORO HERE. HE GAVE ME FIRST CHANCE ON THIS ONE AND I JUMPED ON IT

ITS AN INTERNALLY STOCK CRATE 350 LONGBLOCK WITH A TURBO 400 TRANS AND DANA REAR, VINTAGE AC AND ALL THE OTHER GOODIES YOU SEE.

ACTUALLY, HE STARTED OUT WITH A 400c.i. BUILT SMALL BLOCK AND GOT TIRED OF IT OVERHEATING AND GIVING HIM TROUBLE. HE DECIDED TO JUST GO WITH RELIABILITY INSTEAD. THAT'S FINE WITH ME ALSO. THE UNDERCARRIAGE LOOKS AS NICE AS THE TOP WITH A LOT OF STAINLESS AND POWDER COATING

I'VE HAD MY EYE ON THIS ONE A LONG TIME AND SINCE I CAN'T SEEM TO GET ANY PROJECTS FINISHED THAT I'VE STARTED LATELY, MIGHT AS WELL BUY EM FINISHED...

 

DCP03476.JPG (255934 bytes)48 TRUCK 1.JPG (235809 bytes)48 TRUCK 2.JPG (244000 bytes)48 TRUCK 3.JPG (240255 bytes)48 TRUCK 4.JPG (242435 bytes)100_0240.JPG (1025112 bytes)100_0242.JPG (917473 bytes)100_0243.JPG (1011538 bytes)

A GOOD FRIEND OF MINE ALSO BUILT THIS 48 FORD CUSTOM TRUCK ABOUT 18 YEARS AGO AND I BOUGHT IT ABOUT 1 YEAR AGO. THE TOP IS CHOPPED WITH THE DOOR HANDLES SHAVED AND NOW HAS ELECTRIC SOLENOIDS TO OPEN THEM ALONG WITH THE HOOD & BED COVER

IT HAS A 350 CHEVY ENGINE & TRANS WITH AC , CRUISE, LINE LOCK, A DANA REAR AND TORQUE THRUST POLISHED 17" WHEELS

 

DCP03306.JPG (274399 bytes)DCP03480.JPG (250443 bytes)DCP03896.JPG (282254 bytes)DCP03897.JPG (290702 bytes)  

THIS IS MY 2006 CHEVY SSR. (Super Sport Roadster)  THE PICTURES TO THE LEFT SHOW IT WITH THE TOP DOWN & THE STOCK WHEELS/TIRES. 19" FRONT & 20" REAR. THE PICTURES TO THE RIGHT SHOW A SET I MUST YET INSTALL SETTING ALONG SIDE THE CAR. THEY ARE 20" FRONT & 22" REAR

THESE CARS ARE FACTORY HOT RODS. THIS ONE HAS 400 HP AND A TREMAC 6 SPEED TRANS RIGHT OUT OF THE BOX. IT DOES 105 MPH IN 3rd GEAR, IN SHORT ORDER, WHICH IS TOP COMPUTER CONTROLLED SPEED UNTIL SUCH TIME AS I INSTALL A PERFORMANCE CHIP. ONCE I'VE INSTALLED THE CHIP, I HAVE NO IDEA WHAT IT WILL THEN DO AT THE END OF 6th GEAR ???

 

FATBOY 1.JPG (227097 bytes)FATBOY 2.JPG (276524 bytes)FATBOY 3.JPG (315632 bytes)

THIS 97 HD FATBOY IS BORED AND  CAMMED WITH A MODIFIED CARBURETOR & A NICE EXHAUST SYSTEM. THIS ONE IS CURRENTLY FOR SALE HERE ON THE WEB SITE. JUST CLICK BELOW FOR MORE DETAILS

"VEHICLES FOR SALE - CLICK HERE"

 

1 1995 Cushman.JPG (81864 bytes)5 1995 Cushman.JPG (119856 bytes)

MY 1995 CUSHMAN 3 WHEELED SCOOTER IS PICTURED HERE. IT STARTED LIFE AS AN "NYPD" METER MAID BUGGY AND WAS BLUE & WHITE IN COLOR. I'M TOLD IT IS POWERED BY A DIHATSU 3 CYL ENGINE AND IT HAS A 3 SPD AUTOMATIC TRANS. I ROLL DOWN THE ROAD AT A TOP SPEED OF 40-45 MPH. YOU CAN SEE THE MODS I HAVE DONE OF THE PIX. JUST CLICK ON THE THUMBNAILED PIX

 

 

 ARE YOU RESTORING A CUSHMAN 3 WHEELER (TRUCKSTER) ??? 

OR JUST HAVE SOME INTEREST IN THEM. IF SO, THE FOLLOWING LINKS MAY BE OF INTEREST TO YOU

YOU MAY WANT TO RIGHT CLICK ON THE LINKS AND OPEN THEM IN A NEW WINDOW OR TAB SO YOU DON'T HAVE TO HIT THE BACK BUTTON TO RELOAD THIS WEB PAGE

PLEASE NOTE THAT THE 2 WHEEL SCOOTERS ARE NOT INCLUDED HERE AS THERE IS ALREADY A LOT OF INFO ON THE INTERNET CONCERNING THOSE MODELS. THE 3 (AND 4) WHEELERS HAVE A MORE LIMITED FOLLOWING AND I HOPE TO BE OF SOME HELP TO THOSE FOLLOWERS

 CLICK THIS TEXT  FOR THE CUSHMAN GROUP @ YAHOO GROUPS 

CLICK THIS TEXT FOR PARTS www.directparts.com

 

THE FOLLOWING 12 LINK ARE PARTS AND SERVICE MANUALS FOR 3 & 4 WHEEL TRUCKSTERS. YOU MUST HAVE A REASONABLY MODERN COMPUTER AND BE ABLE TO OPEN "PDF" TYPE FILES  IF ANY OF THEM ARE BAD LINKS, PLEASE LET ME KNOW

THEY ARE IN NO PARTICULAR ORDER, THERE ARE INDEX PAGES WITHIN THE FILES, SO YOU MAY HAVE TO REORGANIZE & RENUMBER THOSE THAT MAY BE PART OF THE SAME CONTINUING MANUAL

GOOD LUCK WITH YOUR PROJECT AND I HOPE I'VE BEEN SOME HELP !!

PDF-1   PDF-2   PDF-3   PDF-4   PDF-5   PDF-6 

PDF-7   PDF-8   PDF-9   PDF-10   PDF-11   PDF-12

 

 

 

DCP01563.JPG (325465 bytes)DCP01562.JPG (306622 bytes)DCP03870.JPG (312224 bytes)Cushman Concept.jpg (1379088 bytes)DCP03875.JPG (340737 bytes)DCP03874.JPG (343036 bytes)

MY 1974 VERSION OF THE 3 WHEELER WAS A MILITARY UNIT IN ITS FIRST LIFE. I PLAN ON MAKING IT A CUSTOM AS I TRIED TO GET SOME MILITARY BUFFS INTERESTED IN IT FOR A COUPLE OF YEARS NOW AND THEY SHOWED NO INTEREST OR WANTED IT FOR NOTHING I GUESS

ONE PICTURE IS A CONCEPT DRAWING OF WHAT I PLAN ON DOING. THE TAIL LIGHTS ON THE FINNED REAR QUARTER PANELS ARE 59 CADDY LAMPS. THEY REPOP THEM AND THEY LOOK NICE SO I BOUGHT 4 OF THEM. I HAVEN'T SET MY THOUGHTS ON A COLOR YET BUT SCHOOLBUS YELLOW MAY BE THE CHOICE

UP ABOVE ARE SOME PIX OF THE UNIT IN ORIGINAL CONDITION PLUS THE CONCEPT PICTURE AND BELOW ARE PIX OF THE GREASY PARTS AS I TORE IT APART. I WILL ADD THE "AFTER" PIX BELOW BESIDE EACH OF THE "GREASY" PIX AS I FINISH THEM TO SHOW MY PROGRESS

DCP03883.JPG (341432 bytes)DCP03882.JPG (345549 bytes)DCP03881.JPG (367433 bytes)DCP03879.JPG (458039 bytes)DCP03878.JPG (379893 bytes)DCP03876.JPG (433370 bytes)

DCP03886.JPG (363986 bytes)DCP03887.JPG (304340 bytes)DCP03889.JPG (363151 bytes)DCP03891.JPG (468142 bytes)

BELOW ARE SOME PIX OF THOSE PARTS THUS FAR DEGREASED, SANDBLASTED AND REPAINTED

RECON 1.JPG (192738 bytes) RECON 2.JPG (149336 bytes) recon 2b.jpg (215842 bytes) RECON 3.JPG (140961 bytes) RECON 4.JPG (160778 bytes) RECON 5.JPG (142395 bytes)

JUST BELOW THIS TEXT IS WHAT THE ABOVE IS DEVELOPING INTO AS I GO

DCP03937.JPG (265866 bytes) RECON 13.jpg (178414 bytes) RECON 14.jpg (165346 bytes) RECON 15.jpg (150370 bytes) RECON 16.jpg (81358 bytes)